Fixed Staple Safety Hasp

Safety hasps provide good security under many conditions. The S. Parker 11200 series has sizes to fit most situations where a fixed staple is necessary or desirable. The hasps come complete with all screws.

Adjustable Staple Safety Hasp

Adjustable staple safety hasps work with a bit more adaptability than do fixed staple safety hasps, and the S. Parker 12200 line is complete with screws and carded.

Heavy Security Hasp

Heavy Security Hasps provide greater security under many conditions.

Swivel Staple Safety Hasp

Swivel staple hasps allow using the staple for quickly fastened a door or shutter without actually inserting a lock shackle. S. Parker swivel staple safety hasps are packed complete with screws, in zinc plating.

Light Weight Safety Hasp

For light duty applications, the S. Parker 14302 2" safety hasp comes complete with screws, carded, and is steel brass plated .

Flex Hasp

For corner or contour use, flex hasps are unbeatable. The S. Parker flex hasps come in two and three link models, and are zinc plated to resist corrosion. The hasps are carded and come complete with screws.

Heavy Duty Straight Bar Hasp

For true heavy duty use, straight bar hasps offer excellent service. The S. Parker 05394 is 7 3/8" long by 1 3/4" wide, and made of steel a full 1/4" thick. The hasp is zinc plated to resist rust, and comes carded with all necessary screws.

Heavy Duty 90 Degree Angle Bar Hasp

For those corners where a straight bar hasp will not work, a 90 degree hasp may be ideal. The S. Parker heavy duty model is a full 1/4" thick, 4 5/8" x 3" overall, and zinc plated. The 05395 90 degree angle bar hasp is carded complete with screws.

Extra Heavy Weight Hinge Hasp

Available as the 2545 poly bagged hasp, or the 16207 carded hasp, S. Parker's 7 1/4" extra heavy weight hinged hasp has zinc plating, comes complete with screws and has an additional square hole to accept a carriage bolt head for greater security.

Hasp Lock

S. Parker’s 17264 hasp lock is chrome plated steel, 4 1/2" long, and is carded with all required screws. The lock is permanently attached to the hasp, so it cannot be lost.

Barrel Bolts

S. Parker's extra heavy barrel bolts are padlockable for greatest security. Notches lock the bolt securely in open or closed position. Suitable for barn, garage and shed doors, the bolts come with universal and surface mount strikes, and may be installed with carriage bolts for even greater security.

S. Parker's standard weight barrel bolts are suitable for windows, average and light weight doors, and cabinets. A body notch secures the thrown bolt for greater security, and construction is all steel. Complete with screws and surface strike.

S. Parker's extra heavy barrel bolts are made of brass plated steel. Positive locking is created with notches on the body of the barrel, and the bolts provide excellent security for screens, doors and windows

Surface Bolts

The S. Parker 232 series of surface bolts are of extruded brass or aluminum, and are packed with screws. Screws are invisible once bolt is mounted.

Black Square Bolt

Black square bolts are very useful for gates, barns and other outbuilding doors. They come carded in 4", 5", 6" and 8" sizes.

Gate Latch

S. Parker's ball end lever gate latch comes in zinc plate (25200) and is quick opening with the lift up, ball end lever. The ball end gives a comfortable grip on this carded, solid steel latch that comes complete with screws.

Letter Slots

S. Parker's series of magazine slots is 3 1/2" x 13" overall, with a 2 1/4" x 11" slot.

Wrought Steel Door Pulls

S. Parker wrought steel door pulls come in two sizes and three finishes to fit almost all door pull needs. Wrought steel pulls are exceptionally sturdy and durable.

S. Parker's Door Armor is available in a polished brass finish. Easy installation. Solid brass door armor is for use on 1 3/4" thick doors with 2 3/4" backset.

Kick Down Lever Type Door Holders

S. Parker carries a wide array of kick-down door holders in solid and cast brass, die cast alloy, and cast aluminum. All are packed with screws for easy installation. and all have replaceable rubber tips.

Straight Door Stop

The straight door stop mounts on the wall or baseboard, quickly and easily. It comes in finishes and is of cast alloy with a 3” projection to keep the door knob from striking the wall.

L Type Door Stop

The S. Parker L type door stops are easily installed, and take very little space. Overall height is 1 3/8" and projection from the back edge is only 1". The 21330 model is brass plated, and carded, and the model 37 is poly bagged and brass plated.

Hinge Pin Door Stop

The S. Parker hinge pin door stop is brass plated or satin nickel, and attaches quickly to most hinge pins.

Spring Door Stop

This door stop model has a spring wound shank, and is cast alloy, with a 3" projection.

Spring Chain Doorstop

Double chain and spring absorb shock to avoid damage to storm doors that are blown open or forced back too far against hinges. Our hold up spring prevents chain from damaging door.

Cupboard Turn

S. Parker's 57300 brass plated cupboard turn is a classic. The knob turns in either direction to open the cupboard and closes automatically. The cupboard turn is carded and complete with screws.

Magnetic Catch

S. Parker's BIN 54280 magnetic catch is packed with screws, has aluminum finish, and 12 to 15 pounds of gripping power. It works well with single cabinet doors of moderate weight. The catch comes in a bin pack of 100 or 1 per card.. The S. Parker 61P has a tan plastic case, and 12 to 15 pounds of holding power. It is packed in a poly bag, or as 54500 1 per carded.

Heavy Duty Magnetic Catch

Using 3 self-aligning magnets, the S. Parker 62 and 54303 Heavy Duty magnetic catch has 35 pounds of holding power, for heavier cabinet doors or double door installations. It is brass plated.

Double Roller

Catch S. Parker's 2001 double roller catch provides excellent holding power for cabinet doors, and is packed with screws. The zinc plated catch is available in a poly bag, or, as 55202, carded, one to a card.

Single Roller Catch

The 2000 single roller catch works well with light doors, and is packed with screws. It is zinc plated and comes in a poly bag, or, as 55201, carded.

Touch Latch

S. Parker’s Touch latch is excellent
for moderate to light weight cabinet doors. It is zinc plated, and packed with screws, in a poly bag, or, as 56200, carded.