Contractor Quality® Solid Brass Rail Fittings

All fittings are of solid brass, and come packed complete with all required matching screws.
For 45 degree changes of direction, the 178 solid brass 45 degree ball elbow works beautifully, in polished solid brass. The elbow fits 2" diameter tubing.

The 179 45 degree side outlet ball elbow is of solid brass, with a polished brass finish, to fit 2" tubing. This elbow accepts tubing from three directions and also serves as an end cap and direction changer.

S. Parker’s 182 side outlet ball cross has five entry/exit spaces so serves to define space in complex areas, and can provide a double pass-through and brace for multiple rail installations.

The 183 ball T accepts tubing from three directions, spaced 90 degrees apart around a single plane, so may serve as an intermediate top and passthrough support for rails.

It is available for 1", 1 1/2" and 2" diameter tubing.

The 184 side outlet ball T caps tubing form one direction, and acts as a topper for a vertical tube, while allowing a continuous run across another plane. It is available for 1", 1 1/2" and 2" diameter tubing.
Type Item Number Description
45 Degree Ball Elbow 178 PB2 Polished Brass 2"



Type Item Number Description
45 Degree Side Outlet
 179 PB2 Polished Brass 2"



Type Item Number Description
Side Outlet Ball Cross

 182 PB1 Polished Brass 1"
182 PB1H Polished Brass 1 1/2"
182 PB2 Polished Brass 2"
182 PCH1H Polished Chrome 1 1/2"
182 PCH2 Polished Chrome 2"

Ball T
183 PB1 Polished Brass 1"
183 PB1H Polished Brass 1 1/2"
183 PB2 Polished Brass 2"
183 PCH1 Polished Chrome 1"
183 PCH1H Polished Chrome 1 1/2"

Side Outlet Ball T
 184 PB1 Polished Brass 1"
184 PB1H Polished Brass 1 1/2"
184 PB2 Polished Brass 2"
184 PCH1 Polished Chrome 1"
184 PCH1H Polished Chrome 1 1/2"



The S. Parker 185 90 degree ball elbow is a standard direction changing ball elbow in polished chrome and polished solid brass. It is available for 1 1/2" and 2" diameter tubing.

 The 186 ball cross serves as an intermediate support for both horizontal and vertical tubes, in polished brass or polished chrome. It is available for 1", 1" and 2" diameter tubing.

The 187 side outlet ball elbow serves as a direction changer (90 degree) at a corner for one piece of tubing while serving as a top cap for another, in both polished brass and polished chrome. It is available for 1", 1 1/2" and 2" diameter tubing.

The 189 S. Parker scroll end gives a fancy finish, usually to horizontal tubing runs for railings, and is of polished brass, for 1 1/2" and 2" diameter tubing.

The 193R ball head (end) caps a vertical tube beautifully. It is available in both polished chrome and polished brass, and to fit 1 1/2" and 2" tubing.
Type Item Number Description
Ball Elbow
 185 PB1H Polished Brass 1 1/2"
185 PB2 Polished Brass 2"
185 PCH1H Polished Chrome 1 1/2"
185 PCH2 Polished Chrome 2"

Ball Cross
 186 PB1 Polished Brass 1"
186 PB1H Polished Brass 1 1/2"
186 PB2 Polished Brass 2"
186 PCH1 Polished Chrome 1"
186 PCH1H Polished Chrome 1 1/2"

Side Outlet Ball Elbow
 187 PB1 Polished Brass 1"
187 PB1H Polished Brass 1 1/2"
187 PB2 Polished Brass 2"
187 PCH1 Polished Chrome 1"
187 PCH1H Polished Chrome 1 1/2"

Scroll End 189 PB1 Polished Brass 1 1/2"
189 PB2 Polished Brass 2"


Ball Head-End
193R PB1H Polished Brass 1 1/2"
193R PB2 Polished Brass 2"
193R PCH1H Polished Chrome 1 1/2"
193R PCH2 Polished Chrome 2"



The 195 ball flange is 6" high, and comes to match 2" tubing diameters, in polished solid brass.

The 90 degree flush elbow gives a smoother, more contemporary line than does a ball elbow, and the S. Parker 211 is available in polished brass in both 1 1/2" and 2" sizes.

The 90 degree flush T (212)
continues the smooth line of an installation, and comes in polished brass, in 2" size.
S. Parker’s 45 degree flush T (213) prevents an abrupt direction change in an installation, and is available in polished brass, 2" size.

The 214 flush side outlet elbow maintains the contemporary line when direction changes on two planes are needed, and is available in polished brass, both 1 1/2" and 2" sizes.
Type Item Number Description
Ball Flange 195 PB2 Polished Brass 2" x 6"
Ball 3" Diameter



Type Item Number Description
90 Degree Flush Elbow 211 PB1H Polished Brass 1 1/2"
211 PB2 Polished Brass 2"



Type Item Number Description
90 Degree Flush T 212 PB2 Polished Brass 2"



Type Item Number Description
45 Degree Flush T 213 PB2 Polished Brass 2"



Type Item Number Description
Flush Side Outlet Elbow 214 PB1H Polished Brass 1 1/2"
214 PB2 Polished Brass 2"






The 216 flush cross provides an almost flat four way support, and change of direction, in polished brass.

It comes in 1 1/2" size.
The S. Parker 222, 45 degree flush elbow gives a less sheer direction change than a 90 degree elbow, and is available in both 1 1/2" and 2" sizes, in polished chrome and polished brass.

The adjustable saddle supports a rail at any angle, after slipping into the top of one tube. It swivels to adjust to the angle, and is available in polished brass and comes in both 1 1/2" and 2" sizes.

S. Parker's 188 flange provides a three screw mounting base for tubing, and comes in 1" and 1 1/4" for polished solid brass tubing, and 1" and 1 1/4" for polished chrome tubing.

The 188W wall flange is available with 3" and 4" diameter base sizes, with the model for 1 1/2" tubing using a 3" diameter base, and for attachment on walls, while the 4" diameter base is for 2" tubing. Both sizes are available in polished brass and polished chrome.The S. Parker 188F floor flange has a 3” base for 1 1/2" tubing, and a 4" base diameter for 2" diameter tubing. Both sizes are available in polished brass and polished chrome.
Type Item Number Description
Flush Cross 216 PB1H Polished Brass 1 1/2"



Type Item Number Description
45 Degree Flush Elbow 222 PB1H Polished Brass 1 1/2"
222 PB2 Polished Brass 2"
222 PCH1H Polished Chrome 1 1/2"
222 PCH2 Polished Chrome 2"



Type Item Number Description
Adjustable Saddle 425 PB1H Polished Brass 1 1/2"
425 PB2 Polished Brass 2"



Type Item Number Description
Flange
 188 PB1 Polished Brass 2"
188 PB1Q Polished Brass 2"
188 PCH1 Polished Chrome 1"
188 PCH1Q Polished Chrome 11/4"

Wall and Floor Flange
 188 WPB1H Polished Brass 1 1/2" x 3" Wall
188 WPB1H Polished Brass 2" x 4" Wall
188 WPCH1H Polished Chrome 1 1/2" x 3" Wall
188 WPCH2 Polished Chrome 2" x 4" Wall
188 FPB1H Polished Brass 1 1/2" x 4" Floor
188 FPB2 Polished Brass 2" x 5" Floor
188 FPCH1H Polished Chrome 1 1/2"x 4" Floor
188 FPCH2 Polished Chrome 2" x 5" Floor


The HD188F heavy duty floor flange comes with an extra sturdy 5" base diameter for the 1 1/2" diameter tubing, and a 7" base diameter for 2" diameter tubing. Stability and retention of screws in the floor are much improved over standard diameters. The 1 1/2" size is available in polished brass only, while the 2" size is available in polished chrome and polished brass.

S. Parker’s 188N narrow flange is 2 1/8" wide for 1 1/2" diameter tubing, and 2 3/4" wide for 2" diameter tubing. When rails must be mounted in tight spaces, these flanges do wonders to ease the job. Both sizes are available only in polished brass.
Type Item Number Description
Heavy Duty Floor Flange HD188F PB1H Polished Brass 1 1/2" x 5"
HD188F PB2 Polished Brass 2" x 7"
HD188F PCH2 Polished Chrome 2" x 7"



Type Item Number Description
Narrow Flange 188N PB1H Polished Brass 1 1/2" x 2 1/8"
188N PB2 Polished Brass 2" x 2 3/4"






S. Parker’s 194 universal angle ball is 3 1/2" in diameter and fits on a 2" diameter tube. It is solid brass, and available in polished chrome and polished brass finishes.
Type Item Number Description
Universal Angle Ball 194 PB2 Polished Brass 2"
194 PCH2 Polished Chrome 2"





S. PARKER HARDWARE MFG CORP
Parker Drive, P.O. Box 9882, Englewood, NJ 07631
NJ (201) 569-1600 | NYC (212) 925-6300 | 1-800-S-PARKER
FAX (201) 569-1082 | 1-877-636-5712
hardware@sparker.com

 

sitemap